wiki.allensmith.net

Personal "Rough Notes & Useful Links

User Tools

Site Tools


kb:flash:ciscoe3000

This is an old revision of the document!


Cisco/Linksys E3000 Tomato Shibby Flash

Reference: http://www.dd-wrt.com/wiki/index.php/Linksys_E3000

Only E3000 specific firmware must be used to flash this router. Using any other build of firmware will brick your router!

Download the Required Firmware

Flashing from Factory E3000 Firmware

  1. 30/30/30 Reset this router back to “Factory Defaults”
    • Login using the factory default admin & admin User & Password
  2. Flash this router using dd-wrt.v24-21061_NEWD-2_K2.6_mini-e3000.bin
    • Wait a full 5 min. to make certain this flash has completed.
  3. Power off, wait 30 sec., then power back on
    • Wait 3 min. to make certain the router has finished trying to boot.
  4. 30/30/30 Reset this router again
    • Again, wait 3 min. to make certain the router has finished booting
  5. set the User & Password back to admin & admin
  6. Now flash this router with tomato-E3000USB-NVRAM60K-1.28.RT-MIPSR2-124-VPN.bin
    • Wait at least 5 min. for the router to finish flashing. (It took a little longer for me to see a User & Password pop-up)
  7. Power off, wait 30 sec., then power back on
    • Wait 3 min. to make certain the router has finished trying to boot.
  8. 30/30/30 Reset this router yet again
    • Again, wait 3 min. to make certain the router has finished booting
kb/flash/ciscoe3000.1421126754.txt.gz · Last modified: 2016/01/13 20:23 (external edit)